De Vielle Fireside Chimney Balloon - Small 300x280mm

• Stops chimney draughts
• Stops down draughts and updraughts
• Stops debris, soot and bird mess
• Inflate to install, deflate to remove
• Allows for a little ventilation
• Completely reusable
• Easy installation - no tools required
• Size: SMALL 300mm x 280mm (12" x 11")

Instructions:

1. Attach the inflation hose to the end of the valve on the Chimney Heatsaver Balloon
2. Open the valve and part-inflate the Chimney Heatsaver Balloon
3. Do not fully inflate before inserting into the chimney, otherwise this may cause damage and / or result in a poor fit
4. Place into position in the chimney stack and complete inflation using either an air pump (comes with large and medium size only) or blowing into the air hose provided
5. Close the Chimney Heatsaver Balloon valve
6. The inflation hose should then be removed
7. Check the Chimney Heatsaver Balloon is firmly in place without it being too tight